Linksys Router - Default Username And Password

When we say it is quite easy to log into a wifi router’s dashboard, we mean it! Similarly, if we talk about Linksys wifi router login, it is a two-minute task. All you need is a stable internet, consistent power supply, and Linksys router default username and password to log into the router’s settings. Was that difficult, no right? Let’s show you how easy it is to log into the Linksys wifi router.

Linksys Router Step-by-Step Login Guide - 

Here is the step-by-step guide for Linksys router login. Read the steps to know what are Linksys router username and password; 

• Electricity connection
• Step 1: Before trying to log in to the Linksys router you must complete the router hardware setup. 
• Step 2: For this, you first need to connect the wifi router with the power socket. 
• Step 3: Make sure you use the power adapter that comes with the Linksys router. 
• Step 4: Look for the power cord and connect it to the power wall socket and the other end to the power post of the router at its rear. 
• Step 5: Then turn on your Linksys router.

• Modem connection 
• Step 1: Connect your wifi router with a modem to provide an internet connection to the local network devices. 
• Step 2: For that, get an ethernet wire. Plug one end of the cable into the WAN port i.e. internet port of the Linksys router. You can find it at the rear of the router. 
• Step 3: This port is usually blue or gray so look for that. 
• Step 4: Now plug the other end in the LAN port of the modem which is usually in yellow. 
• Step 5: Your router is now associated with the network connection. 

• Router Login
• Step 1: To start with the login process, first, open the web browser. 
• Step 2: In the web address bar enter the URL myrouter.local login. 
• Step 3: If due to any reason you are unable to access myrouter.local then enter the IP address 192.168.1.1. 
• Step 4:  Hit the enter key to launch the URL or Ip address web page. 
• Step 5: Once you can access the page then, type in your login information i.e. ‘admin’ for username, and leave the field blank for password. 
• Step 6: These are the Linksys router default username and password. 

Important Note - In case, you are unable to log in with the default credentials you need to reset the Linksys router device because only then you will be able to log in with your default login information.

Linksys Router Logged In!

So that was all about the Linksys router login. In case, you don’t know the Linksys Router Default Username And Password, then reset the router. After resetting, the device goes back to its default login settings. So, now you can log in by entering ‘admin’ in the username field. Also, if you can’t access the router login page then, try logging in via IP address, i.e., 192.168.1.1. It is the default IP address assigned to the Linksys router. Enjoy Linksys!